Bedini SG The Complete Advanced Handbook

[Aaron]

Live Q & A call for the Bedini SG Trilogy

We're looking at doing a live Q & A conference call Monday the 10th at 6pm Pacific time zone.

The phone number and conference room code will be sent out to the member's list for any of the individual books or packages relating to the Bedini SG Trilogy.

[Aaron]

Bedini SG Live Call

This coming Monday the 10th at 6pm Pacific Time Zone, we're having a live Q & A call with Peter Lindemann and Aaron Murakami.

This is by invite only for those of you who have the Beginner's, Intermediate or Advanced Handbooks.

We'll be sending out the phone number and conference room ID on Sunday and Monday.

We'll be starting promptly and after the introduction and beginning announcements, we'll open up for questions.

Please review the books before the call - we only want to spend time answering questions about items that are not covered in the books.



This call could obviously go on for days but we will try to keep it to 1 to 1.5 hours at the most. We can also do other calls in the future.

Besides the books, here are some videos relating to the Bedini SG and even two on Battery Rejuvenation. After reviewing the books, these videos might answer a couple questions - in any case, they might get your own wheels spinning to stimulate some more questions!

Classic roller skate wheel SG https://www.youtube.com/watch?v=xiZ86Dqckm0

Sony Capstan motor SG https://www.youtube.com/watch?v=uFkjTeJ4fAg

Low tech mechanical switch https://www.youtube.com/watch?v=plv9bb-zhj8

Winding a SG coil https://www.youtube.com/watch?v=DUGh9v2AsuA

Building an SG kit (not currently available) https://www.youtube.com/watch?v=7SiwHRrNISE

SG pushing the battery good https://www.youtube.com/watch?v=pgRMnD7W278

Open gap for faster rpm https://www.youtube.com/watch?v=JM-PZiTUJZo

Battery rejuvenation https://www.youtube.com/watch?v=K4__eH9-MXk

More battery rejuvenation https://www.youtube.com/watch?v=XA7iA0iXuB4

Discussion on SG Trilogy https://www.youtube.com/watch?v=eDoz5vgkTOI


Enjoy and we'll be in touch with the phone number and conference call code.

Take care,
Aaron & Peter

[BroMikey]

Good Information

Hey Peter

Good to know the time line. I really did not know all of the story.

A girl smokes all of the hard heads who think they know, when really they are all babbling idiots. Good to hear your voice. A special thanks to Aaron for being such a good side kick

Mikey You guys are Kool. Keep it going.

Hey Mario,

Good question. The main reason I "skipped it" was that that first type of Energizer was built from an existing device that John modified. The part numbers and exact modifications have never been revealed, so it wasn't something experimenters could run right out and duplicate. The internal configuration was similar to the illustration on page 47, and the actual unit is pictured on page 48. I think he built it out of a "ceiling fan motor". The purpose of the capacitors across the coils was probably to produce a resonant effect at the target speed to further increase output and reduce drag.

This is all well within John's knowledge base and capability, but not a good place to get beginners started on making their first Low-Drag Generator.

As I said in my previous post "I have focused on an in-depth explanation of the ESSENCE of the method and its historic development."

I hope that helps.

Peter

[Dog-One]

SG

SG pushing the battery good
Bedini SG - pushing output battery to 15.67v - YouTube

Aaron, this video has me hooked. I'd like to build what you're showing and add a latching relay circuit with a voltage comparator so the two batteries are swapped whenever the output battery reaches some level.

What do I need to get; how do I start?

Thanks much.

[Aaron]

battery swapper

Aaron, this video has me hooked. I'd like to build what you're showing and add a latching relay circuit with a voltage comparator so the two batteries are swapped whenever the output battery reaches some level.

What do I need to get; how do I start?

Thanks much.

Hi, the specs for the machine itself are in the Beginner's book at Bedini SG - The Complete Handbook Series for the Bedini SG & Bedini SSG

For the battery swapper, you'd have to design it yourself - not sure if there are any diagrams of one online. There were some battery swapping circuit discussed in the past, but not sure if they were for the SG or not. Sorry I couldn't be more help - would like a battery swapper myself.

[Aaron]

battery swapper

Aaron, this video has me hooked. I'd like to build what you're showing and add a latching relay circuit with a voltage comparator so the two batteries are swapped whenever the output battery reaches some level.

What do I need to get; how do I start?

Thanks much.

Hi, the specs for the machine itself are in the Beginner's book at Bedini SG - The Complete Handbook Series for the Bedini SG & Bedini SSG

For the battery swapper, you'd have to design it yourself - not sure if there are any diagrams of one online. There were some battery swapping circuit discussed in the past, but not sure if they were for the SG or not. Sorry I couldn't be more help - would like a battery swapper myself.

[BroMikey]

[BroMikey]

Daftman swapper

[BroMikey]

Big Swapper





12V 100A Battery Automatic Changeover Switch Battery Isolator Dual Battery Bank | eBay

[BroMikey]

Directory:Bedini SG:Replications:Monsieur Bonheur-SG - PESWiki

[Aaron]

Bedini SG private call

Here's the private invitation only Q & A call we did:

[Dog-One]

Looping the Bedini SG...

Here's the private invitation only Q & A call we did:

Really enjoyed this video. Peter was fired up.


The talk about looping and trying to move batteries around with latching relays...

Forget about it. How about two machines--out of A to in of B; out of B to in of A.

Can you run this by Peter and see what he thinks?

If the output pulses are too strong to pass back into the next stage, how about buffering the input with a resistor and filter cap...?

A looper would not only stifle the critics with their agenda, but provide a means to start harnessing the energy while the system is active. A true power source driven by radiant energy.

[Aaron]

two machines

Forget about it. How about two machines--out of A to in of B; out of B to in of A.

That's already being done with two linear regulator circuits to convert the spikes into steady DC to feed to one machine and the 2nd machine has it's spikes converted to steady DC to the front of the 1st machine. That's required since it can't run on the spikes and simply putting the spikes to caps doesn't do the same thing.

Good insight!

[Dog-One]

That's already being done with two linear regulator circuits to convert the spikes into steady DC to feed to one machine and the 2nd machine has it's spikes converted to steady DC to the front of the 1st machine. That's required since it can't run on the spikes and simply putting the spikes to caps doesn't do the same thing.

Good insight!

I thought so too until I looked at the basic circuit without the dump caps--trouble is the common bus; it goes from positive input to negative output. If you connect a second SG to loop back, you just shorted everything out.

Mother Nature refuses to make this easy doesn't she.

[Aaron]

isolation

I thought so too until I looked at the basic circuit without the dump caps--trouble is the common bus; it goes from positive input to negative output. If you connect a second SG to loop back, you just shorted everything out.

Mother Nature refuses to make this easy doesn't she.

It's easy to isolate them from each other.

For example, you can have a trifilar coil with a trigger, power and recovery winding. The recovery winding can charge a cap. You can put that cap right back to the front and reduce the input draw by 50% AND the front battery doesn't even see that cap! I posted a schematic that will do that before but only one person commented that they tried it. Keeping these things from seeing each other is not an issue.