Bedini-Lindemann 2012 Conference

[mbrownn]

Wish I could be there

Will this conference be taped for us that cant make it?

[Aaron]

payment

Greetings everyone,

We apologize but we can no longer accept bank transfers or wires for payment. There is not enough time for the wires to be completed in time for the conference.

We can now only accept money orders or cashier's checks by overnight or 2nd day air.

If you have sent payment but have not received a payment confirmation, please private message me immediately.

Thank you!

[Aaron]

filming the conference

Wish I could be there

Will this conference be taped for us that cant make it?

I'll ask the others.

[mbrownn]

Thanks it would be appreciated

[Aaron]

paying at the door

mbrown,

I might be able to find out tomorrow.

------------

@All, besides sending us a check or money order overnight, you CAN pay at the door with cash. But before just coming, make sure to confirm with me so I can have your name on the list. We really can only have so many people. Fill out and scan me the registration form and let us know you'll pay cash at the door.

[Aaron]

massive success

The conference was a MASSIVE SUCCESS!

There was quite a bit of info shared that had never been revealed publicly before about electric motors. No complex theories needed and all can be proven using conventional info that is in the textbooks.

• Conventional electrical simulators can show extremely high COP electric motors because all the conventional formulas actually allows for it. Anyone that says different theories are needed are wrong.
• 100-200 watts per horsepower electric motor since all the Lenz law has been removed (different presenter) than the above bullet point. I saw that motor a couple years ago. All done using CONVENTIONAL textbook info to prove it I know this presenter - one of the most brilliant and IMPORTANT electrical engineers alive today...and you would have never heard of him. Simple algebra is all you need. It is so simple, even I can do this math.
• How to get serious mileage gains in a car. This was Ron Hatton with the Gadgetman Groove. I presented him with my data for the last 60 times that I went to the gas station with plenty of notes... for 2 months, the groove did nothing. Ron was kind enough to have Karl from Tacoma that does the mod come to Spokane to look at my car. Idle air intake was a problem and was too much of a vacuum loss so he restricted that a little. Computer showed fuel trim numbers dropped through the floor. He also adjusted the groove in the throttle body a bit. I reset the computer over night and have been to the gas station twice since then. The average for the last 58 times I went to the gas station was 20.xx (will have to ask Ron the exact decimal) and it is already at 26.xx, which is a 22% increase in MPG on a Subaru Legacy GT 2.5 liter boxer engine with 5 speed. It was the single most biggest difference mileage from anything I have ever tried on that car. Being full time AWD, it is difficult to get good mileage anyway and 22% immediately is very big. I will get even more as the computer relearns over the next few fill ups... IT WORKS!
• Many other incredible presentations including John Bedini's crystal batteries that were so big you can put a tripod under it and bbq a feast! 2 of them actually!

Over 100 people are already wanting us to do another conference, they loved the smaller venue - it was more intimate and networking was much more easy. I want to give everyone who came priority registration before opening it up to others that didn't come.

Some of the presentations will be available in downloadable digital format so go here to get on the list to be notified: Energy Times

If you're subscribed to Energy Times by A & P Electronic Media then of course you don't have to sign up for that.

If you want information on any future history making conferences like what just happened, go join the list on the conference page here: Conference

[hartiberlin]

Did nobody take some videos with their mobile phones and posted it yet to Youtube ?

I see no videos yet on youtube about it...too bad...
or was it forbidden to make videos at the conference ??

Regards, Stefan.

[Aaron]

videos

Attendees could take photos but no videos.

We will release some videos as they are edited.

I took a lot of photos but haven't had time to do anything with them yet.

[hartiberlin]

Attendees could take photos but no videos.

Pretty lame !
Why did you forbid to take videos ???

What a shame....

[Aaron]

videos of conference

Conferences almost always forbid video recording. That is just a fact of life.

It costs thousands to have someone professionally film the events and then edit them and letting people film it so they can post it for free on youtube defeats the purpose of having it professionally filmed to begin with.

Attendees are paying to watch the presentations, they can take notes and pictures and ask questions. But that doesn't include rights to take video, since the presentations are copyrighted by either the speaker and/or producers of the show.

There was information at this conference that was presented that has
never been presented to the public before. Basically, the cat was let out of the bag for anyone that was paying attention and I can assure you, many people were there paying attention including some physicists, professors, engineers of all sorts who were unable to argue with what was presented. This was one of the most valuable conferences ever held if not the most
valuable since much of the information was very simple to understand and
was presented in a very straightforward fashion. Many lives were changed
this weekend. I feel really good about that.

And you forget, allowing people to video the conference and post it publicly means that people who did not see enough value to come to the conference personally would get to see it free while everyone else had to pay to come, take the long journey, pay for hotels, etc... It would be completely disrespectful to every single attendee to allow that. I could
never be a part of something like that. I admire and respect people that
had enough faith in us to see that it would be worth it. They have my back
and I have theirs. This is a team effort to put something like this on.
The attendees are just as important as the producers or the speakers.
At least that is just how I look at it.

Put yourself in someone's shoes that spent a couple thousand to fly in
from across the world, get a hotel, pay for dining and transportation with
a rental car to have someone turn around and post videos for free when
they invested all their own time, money and effort? If you think that is lame
to respect that, then I don't know what to say.

Anyone that was unable to make it can pay a fair price for each video available from each presentation and they don't have to spend money on hotels, airfare, dining, etc... They miss the experience that can never be substituted but at least they can see what was shared.

There will be another conference and many attendees already want to register for it. It may be a year away but it just depends - it could be sooner and there will be more incredible presentations.

I do want to make something perfectly clear. This conference was not the third of a series of the other conferences. This conference was unique with a diversity of topics and has nothing to do with the producer of the other two conferences. I was the primary organizer and promoter for this conference and I'm not affiliated with the promoter of the other conferences.

And, so it is very clear, proceeds from this event are donated to the lodge, which is a non-profit charitable organization that does a lot of community work helping the less fortunate. That is one of the reasons I'm so passionate about this - it is about service to others - before, during and after the conference.

[mbrownn]

It would be great if you could post some hi res pictures of the motor and the event for those of us that cannot make it.

[hartiberlin]

[Aaron]

conference and motor

Stefan, I can probably post some video "trailers" but all the raw footage is being processed. I won't have anything for a while. It isn't all about making money, I said everyone that paid money to come isn't going to be abused by having it all posted for free.

mbrown, the motor was part of a video presentation. The speaker explained simply what he did. It has zero back emf, it has a lot of torque, the speed can be increased without increasing voltage - instead the circuit increases the switching speed. It is both attraction and repulsion that is pulling the rotor around. His switching mechanism is proprietary but anyone should be able to apply the principles. The switch is brilliant and switches in nanoseconds. I've seen this motor myself - it exists. You'll see what it looks like in the video.

More importantly, he shares some very basic principles that anyone can apply. There are a couple experiments anyone can do that indisputably proves that magnetism is energy or imparts energy. Many of us here already believe this but there is one experiment that will beat any skeptical physicist, engineer, etc... 100% of the time. He was thrown out of a few universities for demonstrating this but it absolutely cannot be argued.

He really is a master of magnetics. His company developed many things. Including a transformer that can lower energy costs for industrial lighting lighting kilowatts of tubes while the core stays cold - removing virtually all magnetic losses (no hysteresis). All his products are the top in the world for their own category.

His work will make it easier for people to understand what to do instead of having to learn complex theories that hardly anyone understands. And, it is all with very elementary principles that non-engineers can get. You really know who gets it when they can explain it in simple terms that anyone can understand.

Also, there are windows of opportunity even in conventional simulator programs that will demonstrate very high COP electromagnetic reaction motors. It isn't a glitch, all the conventional math, etc... actually allows for it. That is what is so surprising. Anyone that says different is spreading disinformation. There is more than one way to skin a cat. Some are complex and some are simple. I prefer the simple.

More coming soon...

[Aaron]

Gadgetman Groove license?

Hello everyone,

If you purchased one of Ron's Gadgetman Groove licenses, please read this:

"I now have corrected the issue with the DVD's and am ready to send them out. As not all purchasers left a copy of their agreements with me, please announcement on the boards (or to the entire group) for those who have purchased their Personal Licenses to contact me via e-mail with their correct shipping addresses and I will send out their DVD's in the next day's mail."

So if that applies to you, please email Ron ASAP so he can send out your package.

[hartiberlin]

Stefan, I can probably post some video "trailers" but all the raw footage is being processed. I won't have anything for a while. It isn't all about making money, I said everyone that paid money to come isn't going to be abused by having it all posted for free.

More coming soon...

Well yes, I understand, but people also go to soccer matches or Baseball
events, although they could also see it for free on TV....

To be there live is what costs the money and makes the thrill...

so posting a few video trailers would only help your cause that next year there will be more participants and will not
hurt your visitors...

Looking forward to see a more detailed summary...and at least see a few pictures.

Many thanks.

Regards, Stefan.