This forum is preserved as a permanent archive. The community continues at eMedia Press.

Announcement

Collapse
No announcement yet.

2019 Energy Conference

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Dang, is that thing ever nicely done. Put them guys together and lets
    see them power a 50,000 watt building I love it.

    What a beauty sparkgap.



    Comment


    • #47
      DeMeo's Cosmic Ether Exists & Orgone Energy Accumulator

      * NEW RELEASE * JAMES DEMEO, PHD - TWO PRESENTATIONS ON ETHER AND ORGONE

      We're honored to have Dr. James DeMeo present at the 2019 ESTC. He is one of the world's leading authorities on Wilhelm Reich, which includes the science of Orgone - a form of energy that is crucial to life, it is able to be cultivated and even used to assist biological systems, which you'll see.

      NOTE: Keep in mind that the introductory special expires in 48 hours. You can get BOTH videos for only $3 more than the full retail price of one presentation!

      His two presentations are: Cosmic Ether Exists: Correcting a Major Error in Modern Science and The Orgone Energy Accumulator: Experimental Confirmations and New Water-Structuring Evidence





      Get your copies here: Cosmic Ether Exists: Correcting a Major Error in Modern Science and The Orgone Energy Accumulator: Experimental Confirmations and New Water-Structuring Evidence by James DeMeo, Ph.D.

      The first is an overview of the ether and then an insurmountable volume of facts and data that cannot be refuted regarding the reality of the ether. These verifications have been going on for a century and continue to this day but chances are that you've never heard of them - possibly because it disproves Einstein's ether-less Theory of Relativity in a very simple and wholesale manner. This presentation is so important that it should be required study for anyone to graduate from high school because the facts presented literally change everything regarding the foundation of physics starting with time and space and everything built upon that.

      The second covers many verifiable facts about the orgone energy discovered by Wilhelm Reich who was Sigmund Freud's #1 student. This presentation is required study for any interested in the forces of nature. The simple orgone accumulator built correctly can violate thermodynamics in a number of ways and the most tangible is the fact that inside of it, even if the door is open, a warmer temperature is measurable, which never comes into equilibrium with the surrounding temperature! If you want to delve into a self-organizing, negentropic device, then this is it and it is very simple to build and demonstrate.

      WATCH THE FREE EXCERPTS ON THE WEBSITE! There are three - two are excerpts from each of the presentations and one has excerpts from a panel discussion at the conference with discussions of the orgone energy. When you hear what Eric Dollard's personal experience was building a small orgone accumulator and experimenting with it, it will simply blow your mind!

      Get your copies here: Cosmic Ether Exists: Correcting a Major Error in Modern Science and The Orgone Energy Accumulator: Experimental Confirmations and New Water-Structuring Evidence by James DeMeo, Ph.D.

      It is highly recommended to get a copy of Dr. DeMeo's books The Orgone Accumulator Handbook and Heretic's Notebook. These are PERFECT companions to the presentations.



      Sincerely,
      Aaron Murakami

      Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

      Comment


      • #48
        The secret power source of overunity switched reluctance generators

        THE SECRET POWER SOURCE OF OVERUNITY SWITCHED RELUCTANCE GENERATORS

        The Secret Power Source for Over Unity Switched Reluctance Generators by Jack Hanlon, Ph.D.The Secret Power Source for Over Unity Switched Reluctance Generators by Jack Hanlon, Ph.D.
        Sincerely,
        Aaron Murakami

        Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

        Comment


        • #51
          Sincerely,
          Aaron Murakami

          Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

          Comment


          • #52
            Panel Discussion #2 - 2019 Energy Science & Technology Conference

            Panel Discussion #2 - 2019 Energy Science & Technology Conference

            Here is the free viewing of the second Panel Discussion with Walt Jenkins, Aaron Murakami, Mike Clarke, Adam Griffin, Stefan Duminy, & Kurt Kung PhD.

            [VIDEO]http://www.youtube.com/watch?v=Z07bkhI0ZN8[/VIDEO]
            Sincerely,
            Aaron Murakami

            Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

            Comment


            • #53
              2019 ESTC Vendors & Announcements

              SUPPORT THE VENDORS FROM THE 2019 ENERGY SCIENCE & TECHNOLOGY CONFERENCE

              [VIDEO]http://www.youtube.com/watch?v=HGEwLHw7Vwk[/VIDEO]
              Sincerely,
              Aaron Murakami

              Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

              Comment


              • #54
                Full Disclosure coming

                RS Stafford is planning a full disclosure on John Bedini's Ferris Wheel Motor.

                Details here: Full Disclosure Coming - John Bedini's Ferris Wheel Motor - A & P Electronic Media
                Sincerely,
                Aaron Murakami

                Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

                Comment


                • #55
                  * NEW RELEASE * The Electrical Properties of Interfacial Water by Kurt Kung, Ph.D.

                  * NEW RELEASE * The Electrical Properties of Interfacial Water and the Possible Tools to Measure the Subtle Water Characteristics in Vitro by Kurt Kung, Ph.D.



                  At the 2018 Energy Science & Technology Conference, Dr. Gerald Pollack who is a professor at the University of Washington presented on the 4th Phase of Water. This is considered to be some of the most authoritative and advanced science in the world of subtle energy research dealing with water.

                  Dr. Kurt Kung attended the University of Washington and worked closely with Dr. Pollack who was his adviser at the time and currently, they are partners in ongoing water research and technologies. So if you are looking for more authoritative information on methods to measure subtle energy changes in water, this is the presentation for you.
                  [VIDEO]http://www.youtube.com/watch?v=Z99Q2DInywI[/VIDEO]

                  ENERGY HARVESTING FROM WATER

                  Dr. Kung starts with an overview of some of his work with EZ water, which is the 4th Phase of Water known as "Exclusion Zone" water, which you would be familiar with if you studied Dr. Pollack's work. This is what Dr. Kung is referring to when he is discussing the properties of Interfacial Water and its net negative charge.

                  The charge separation that happens when this EZ water is produced is very important because there are two very different types of water that are in close proximity to each other and they do not mix. Therefore, there is a high and low potential or dipole that is formed directly in the water.

                  What that means is that you can literally create a battery using one source of water that is simply in contact with a hydrophilic surface, which in turn creates the EZ water separation - if you have two potential differences in that water, then you have a battery. That in fact is what Dr. Kung did - by stringing a bunch of those water cells in series, he was able to light an LED to prove the point. It is a ways off before this is something that can produce large amounts of power, but it is in its infancy and is a profound discovery.

                  The Electrical Properties of Interfacial Water and the Possible Tools to Measure the Subtle Water Characteristics in Vitro
                  Sincerely,
                  Aaron Murakami

                  Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

                  Comment


                  • #56
                    Free recording available - eric dollard's live call from august 12, 2019

                    FREE RECORDING AVAILABLE - ERIC DOLLARD'S LIVE CALL FROM AUGUST 12, 2019 - Q & A COLORADO SPRINGS TESLA TRANSFORMER PRESENTATION

                    When I was down in West Central Nevada at EPD Laboratories, Inc. we recorded this live call where a few people asked some questions related to the presentation. Go here to listen to it now: 2019-08-12 Live Call Eric Dollard on 20:1 Scale Model Replica of Tesla's Colorado Springs Transformer - Eric P. Dollard - Official Homepage

                    Eric Dollard hit a grand slam with his presentation and demonstration of the 20:1 scale model replica of Tesla's Colorado Springs Transformer, which is available here: Theory, Calculation & Operation of the Colorado Springs Tesla Transformer by Eric Dollard
                    Sincerely,
                    Aaron Murakami

                    Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

                    Comment


                    • #57
                      John Bedini's Self-Recharging Monopole Motor by Peter Lindemann, D.Sc.John Bedini's Self-Recharging Monopole Motor by Peter Lindemann, D.Sc.
                      Sincerely,
                      Aaron Murakami

                      Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

                      Comment


                      • #58
                        Trials & Triumphs of the Reactive Power Motor Generator by Mike Clarke



                        This presentation covers the second self-recharging motor demonstrated at the conference and it is also based on some motor concepts developed by John Bedini along with some other concepts that came from others.

                        Get your copy here: Trials & Triumphs of the Reactive Power Motor Generator by Mike Clarke, D.C.

                        Mike starts off by covering the relationship with his partner Norman, where they came from and what led to the development of this Reactive Power Motor Generator.

                        He shows some of the pieces/components to the motor that were used in the context of how it evolved and how it started as just a motor when he first took it to Paul Babcock's shop as well as the switching circuit that they needed to design to take it to the next level.



                        You'll also hear how it ran for hours and at the end of the run, the input batteries were a few volts higher than when it started! So not only are the back batteries being charged, the front ones are too.

                        It's also important to go up in voltage - this adds some complications for capturing the inductive spikes because the parts may not be rated for it, but there are many reason to go up in voltage. This even applies to the Bedini SG. Most people stick to 12v, but that is for learning. If you go up in voltage, then any voltage drops on the circuit wind up being a lower percentage of the total voltage compared to 12v. These concepts need to be considered and Mike and Norm incorporated these concepts into this machine.

                        [VIDEO]http://www.youtube.com/watch?v=CtHLRb93tlw[/VIDEO]

                        Mike explains some of the challenges and methods they went through to deal with the higher voltages so they wouldn't blow up so many parts.

                        It's also important to understand a crucial aspect to the batteries that must be in place for both the front and back batteries to rise and its simpler than you might think.

                        Get your copy here: Trials & Triumphs of the Reactive Power Motor Generator by Mike Clarke, D.C.

                        The importance of the air core is very important. Paul Babcock covered that in detail in his presentation and Mike will reiterate just how important this is. This machine will no perform like this if it has iron in its core!

                        When applying these principles, Mike winds up with a motor that runs COLD. The components don't heat up. After it gets running, everything cools down on the switching circuit. And, that is with it outputting about 140-150VAC. Keep in mind that Mike's goal is to power his entire home off of this machine.

                        He runs the motor so you can see it in action and while it speeds up, he explains more of the nature of the machine and it ends with some Q & A where Mike shares more details and insights into this project.

                        It is important to understand this is not a "How To" and does not include the schematics. It is a story of Mike and Norm's journey but he does share a lot of the concept incorporated into the machine that you can apply in your own experiments. To give you an idea of where to start, it is very similar to an air core Bedini SG running at a higher than normal voltage. Anyone that follows that path will learn a lot that they never experienced with iron core coils.

                        Mike does say after some of the IP is protected that he will share the how to so others can experiment with it.

                        Get your copy here: Trials & Triumphs of the Reactive Power Motor Generator by Mike Clarke, D.C.
                        Sincerely,
                        Aaron Murakami

                        Books, Videos, ESTC Conference Info, Blog, etc. https://emediapress.com

                        Comment

                        Working...
                        X