Announcement

**Pascuser** · 10-02-2012, 07:34 AM

J-L Naudin experiments concerning Richard VIALLE's overunity device

Jean-Louis Naudin (creator of JLN Labs) was interested in the overunity generator (asd he is french, he can read all the french documentation and understand very well interviews).

Since late august he was interested in working on it, and last days he did the work. His replications works very well. Up to know he didn't compute the COP; but could obtain all was described, and output power from a cut copper bar, with no electric contact inside; output tuning like described, and so on.

His web page describing his work (french page):

-----

I pluged again my U autogenerateur overunity electric generator, replication of Richard VIALLE's one.
I made COP measurements since I never made COP measurements with the U only with the linear autogenerateur (1st version).

Measurements and experiments are reported here:

I could clearly show a COP>1 and the way you can choose to have the COP value you want.
In a first experiment I have COP=1,2
In the next one I have COP=1,7
Then I show how you can have COP as big as you want, 10 or 100 or 1000 or 100 000 or 1 000 000 or infinite! Then you have something new: no COP can be calculated because now you produce energy while you are consuming.

I showed how this COP measurement is of no meaning for the new behavior of this system. You have a COP>1 but you have much more. You have a negative power production coming back to input.
This is the mechanism explaining the COP value as big as necessary: the output power is the same (diminushes slightly but little) while you diminush input power, and a production electric power comes back as a feedback to the input, and SUBSTRACTS to what you inputted.

So Your input can be reduced to as extent as you want, with an ouput slightly diminushed: so the COP=output/intput=nearly the same/what you want as nerby 0 as you want = infinity if you want.

This is for COP measurement and everybody can do it like me. You need to build the U generator, an oscillocope (with a ground isolated from earth, either a PC based oscilloscope with no ground or a classic standard oscilloscope with a ground transformer to isolate from earth ground) and a function generator.

What is more interesting in the system is to have more output power. Since you have an infinite COP, you have the same output power (it is the reduction of input used power that produces big COP).
This is the next step that Richard VIALLE did. He produced 10Watt instead of only 100mW with an output tuning (read the document to know more). And one times he could produce 300 000V arcing back to the input accidentally. This is the work to do... to have more power; when you understand that COP is overunity.

Overunity doesn't mean that you have the output power you want, but is only a ratio (output VS inout). A overunity is yet a big victory against the science system claiming it doesn't exist. But shutting off the system is not enough if you don't have a big output power to use it at home... So a research must be done to have a bigger power.

Jean-Louis Naudin made a web page to present my last results here:

For the moment onlyfrench people are doing replication. Here I gave you infoirmations to do the same work. Again nobody asks you to understand all theory, you just have to do a replication and measure yourself. Many time wasted here in many subjects with hight cost. Here it is a low cost if you have some minimal equipement and skilled a little bit to kno what you are doing. So easy to do... but up to now only french replications.

I did not make an english translation yet of the documents, but I have no time to do all this for the moment, it will be done later. You can do the replication with a basic google translation.

I am here to present something that you can DO yourself.

**zapzap** · 10-02-2012, 04:37 PM

**Pascuser** · 10-02-2012, 04:55 PM

Thank you for your interest.

You can build either a linear device or a bent in U form device. In both case it is the same way of feeding it.
I have started an english translation long time ago but unfinished, and only for few pages.

I give you the link to the unfinoshed translation of the part 1:

http://zedico.info/Extraits_Publics/Pascuser/selfgenerator_1.pdf

When translations will be done, I will post.

To see what must be plugged, you can see the schematics. Without translation it is clear.
You just have to connect a function generator to the input coil wound around the linear copper bar (bar is cut in the middle), and a bulb to the bar terminals. Then you can use an amplifier to boost the input. And to have more power, you lust tune the output with a coil+capacitor at 3,6MHz so that you creat a short circuit at the bar terminals, with the bulb in parallel. All is shown in schematics.

But with english explainations it will be more clear for you, when translation will be finished.

**zapzap** · 10-02-2012, 05:32 PM

Excellent!

Excellent translation! Thank you very much.

**zapzap** · 10-02-2012, 08:46 PM

Naudin replication

I used "Bing" for translating Naudin's replication of the "U" device and it was surprisingly good. He gives a step-by-step approach to his re-creating and testing it. I would appreciate input from our French Connection of his work? Thank you in advance.

**GSM** · 10-03-2012, 12:36 PM

Originally posted by Pascuser View Post

I give you the link to the unfinoshed translation of the part 1:

http://zedico.info/Extraits_Publics/Pascuser/selfgenerator_1.pdf

Already consigned to the Recycle bin !

**zapzap** · 10-04-2012, 06:38 PM

Recycle bin?

Having spent some time looking over the translated version of Nuadin's "u" shaped device replication, his conservative testing indicates an apparent COP of over one. Also, he indicates that the theoretical work is supported by Naudin's independant testing. I'm interested in what insight(s) you have to, I think, relegate this who concept as recycle-worthy?

**woopy** · 10-04-2012, 08:48 PM

Wow GSM !!

If i understand you well , you consider that this "Vialle" technology is not valuable, and is to be rejected in the "recycle bin " ?

If it is so i am very surprised, because "Pascuser" make a real effort to bring here this experiment , with quite good explanations , technical datas and video demo, and replication datas, that everybody can use to build a really simple , practical and cheap replication, which is not the case in a lot of other thread in this forum.

I don't know if this technology is overunity , but as per my thinking it is simple enough (at this basic stage )to be experimented .

OK, my mother tongue is french, so it is easier for me to follow the live video with Mr Vialle, who speaks with a really nice south french accent.

Anyway thank's to Pascuser to propose here this technology , and i would not be surprised if i go in my workshop and bent some copper tubing in a U shape very soon,

good luck at all

Laurent

**truesearch** · 10-04-2012, 09:15 PM

@woopy:

If you do attempt to duplicate the "vialle" experiment please post your results here! I'm interested in seeing what you find.

truesearch

**woopy** · 10-04-2012, 09:51 PM

Hey Truesearch

Yes i intend to replicate the device

but feel free also to do the same , so we can cooperate in the results.

It seems easy to bend a 12 mm diameter copper tube in a U shape , than cut it in 2 pieces in the middle of the U, than wrap it all along with insulated electrical wire , than build the very simple 3.6 Mhz oscillator circuit a la Naudin and than add some variable cap (as per my last video ) to fine tune the resonance et voila

Of course i will deliver the results of my results , probably in form of a video as usual.

but as usual also i am not in a hurry

HO HO

not i am in a real hurry because the 21 of december (mayas prediction ) is arriving very fast

good luck at all

laurent

**sprocket** · 10-05-2012, 10:47 AM

Very interesting, a new way of looking at COP, for me anyway. Basically, your device needs to be able to supply at least the 'conventional power level' for the load in question, but once the load is driven, used input power can drop considerably!

And Naudin seems to have confirmed many of Vaille's claims which is very cool, even if I'm still very 'luke-warm' about Naudin after his Kapanze fiasco - string probably 100's of replicators (et moi!) along for a few months, only to explain the COP 10+ away as measurement error with another expensive piece of kit, rather than having just stuck a few light bulbs in series with the input from the beginning...

I also noted that the 'negative power' seems very dependent on the load being driven - when Naudin uses the fan in place of the bulb, the COP drops significantly. So I would imagine that a DC generator would suffer similarly. And as Pascuser pointed out, getting high COP's is apparently easy, its using this to drive practical loads that may prove to be the biggest obstacle.

It would be great if someone came up with a setup (wire length/gauge, driver circuit etc.) that was capable of driving a practical load, say 100 watts.

**woopy** · 10-25-2012, 12:32 PM

**velacreations** · 12-17-2012, 04:44 PM

what is the status of this project? It seems very interesting, though I don't have the function generator and oscillator needed to replicate.

I was reading Naudin's experiments charging 12V batteries with it, and that seems very useful

**Michelinho** · 12-17-2012, 06:16 PM

Easy enough experiment.

Hi all,

My partner read the patent, french is our prime language, watched the video and did the experiment. It worked on the first try. He experimented with a bent copper tubing, straight tubes and in different locations one from the other with the same positive results. So don't stick to the bent copper tubing only, be creative and enjoy.

I think a bank of Vialle's generator dumped in caps and discharging at a set voltage into a battery would work fine for a small 7A battery.

Take care all,

Michel

Announcement

Richard VIALLE's new theory and experiments about negative mass and overunity

Richard VIALLE's new theory and experiments about negative mass and overunity

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment